Filter
Top Products
15
© 2006 directed electronics—all rights reserved
transmitter valet mode
To enter or exit Valet Mode, press twice and then . The LED
status indicator will light solid when Valet Mode is entered, or will turn
off when Valet Mode is exited.
one-time auto-arming bypass
This will bypass the auto arm feature once only.
1. With the key, turn the ignition on, then off within two seconds.
2. The siren will chirp once to confirm auto arming bypass.
3. The system will not auto arm.
During auto arming bypass the system will not roll up the windows if
SmartWindows is connected, and the accessory output will not auto-
activate when using the remote to arm the system.
low battery warning
When the transmitter battery is low, the system will generate a low-
pitched tone when disarmed.
nnoottee::
The system will revert to normal auto arming when the system
sees the ignition on for at least three seconds.