Filter
Top Products
45
© 2006 directed electronics—all rights reserved
7. Adjust Warn-away zone
z
Press .
z
Siren chirps 2 times.
z
Sensor adjustment mode is entered.
z
Hit vehicle at the desired level of impact.
z
Sensor adjusts itself to the force of Hit.
z
Siren chirps 1 time as confirmation of adjustment.
z
Press to lock adjustment.
8. Press to re-enter Primary zone adjustment
z
Siren chirps 2 times.
z
Primary zone can now be re-adjusted as described in
step 4.
z
Or press again to exit programming mode.
z
The siren will chirp 3 times when sensor adjustment
mode has been exited.
nnoottee::
You must wait 15 seconds after arming for the omnisensor to
become active.