Filter
Top Products
43
© 2006 directed electronics—all rights reserved
6. Press of the remote control to return to Primary zone
adjustment and lock in Warn Away zone setting.
z
Siren chirps 2 times.
z
Primary zone can now be re-adjusted as described in
step 3.
z
Or press again to lock in primary zone setting
and exit programming mode.
z
The siren will chirp 3 times when sensor adjustment
mode has been exited.
z
Auto-Scroll for adjusting sensitivity - press and
hold or to increase or decrease sensitivi-
ty setting several levels rapidly.
adjusting the omnisensor
The Omnisensor is designed for ease of adjustment by the user and to
give the ultimate in impact detection without the possibility of false
triggers that are common with less sophisticated sensor.
While adjusting this sensor it is required that you strike the vehicle with
the amount force that is desired for the system to trigger.
1. Disarm system
2. Transmit Channel 15 (Press 3 times then 1
time).
z
The LED will turn on and the siren will chirp 1 time.
nnoottee::
DO NOT strike window glass or flat sheet metal panels that can
dent easily. It is recommended that you only strike the metal pillars
between the windows, they are structurally sound enough not to dent.
ONLY strike the pillars using the heel of your hand, it is more than suf-
ficient for the sensor to distinguish this as a theft attempt.