Clifford AvantGuard 5.1 Automobile Alarm User Manual


 
28
reset to default settings
z
All system settings (except PIN and remote programming) in
the User Programming grid will be reset to their default fac-
tory setting as indicated in bold lettering.
z
Press the arm/disarm button of the TX; the siren will chirp
twice as confirmation.
panic off/on
z
Off: The panic feature is not available.
z
On: The panic feature is available.
auto start setting - off/battery only/temp only/battery and temp
z
This feature is only available with the IntelliStart option.
z
Off: The vehicle will not autostart.
z
Battery: The vehicle will only autostart when the car battery
gets low.
z
Temperature: The vehicle will only autostart at a preset low
temperature.
z
Battery and temperature: The vehicle will autostart with a
low car battery or low temperature.
blackjax off/on
z
Off: The system cannot enter BlackJax mode.
z
On: The system will enter BlackJax mode when triggered.
nnoottee::
Temperature and battery calibration and settings can be made
only with the Cliffnet Wizard.