Chrysler 2006 PT Cruiser Convertible Automobile User Manual

When installing the Integrated Power Module
cover, it is important to ensure the cover is prop-
erly positioned and fully latched. Failure to do so
may allow water to get into the Integrated Power
Module, and possibly result in a electrical system
When replacing a blown fuse, it is important to
use only a fuse having the correct amperage
rating. The use of a fuse with a rating other than
indicated may result in a dangerous electrical
system overload. If a properly rated fuse contin-
ues to blow, it indicates a problem in the circuit
that must be corrected.
If you will not be using your vehicle for more than 21
days you may want to take steps to preserve your battery.
You may:
Disengage the mini fuse in the Power Distribution
Center labeled IOD (Ignition Off-Draw).
Or, disconnect the negative cable from the battery.