Filter
Top Products
Rear Tire Flat: If the flat tire is on a rear
tire of the vehicle, you will need to use
the jack handle (B) and both jack handle
extensions (C). Attach the wheel wrench (D) to
the jack handle extensions (C). Attach the jack
handle (B) to the jack (A). Use the jacking pad
provided on the rear axle. Turn the wheel
wrench (D) clockwise to raise the vehicle.
Raise the vehicle far enough off the ground so
there is enough room for the spare tire to clear
the ground.
4. Remove all of the
wheel nuts.
5. Take off the flat tire.
Rear Position – All Other Models
540