Filter
Top Products
Manual Fold and Tumble Feature
Folding and Tumbling the Seat(s)
To fold and tumble the seat, do the following:
1. Make sure that there is nothing under, in front
of, or on the seat.
Notice: Folding a rear seat with the safety belts
still fastened may cause damage to the seat or
the safety belts. Always unbuckle the safety
belts and return them to their normal stowed
position before folding a rear seat.
2. Lift the lever, located on the outboard side of
the seat, to release the seatback.
The seatback will fold forward. Leaving the
seatback in this position creates a flat
load floor.
If the seatback cannot fold flat, try moving the
front seat forward and/or put the front
seatback in the upright position.
28