Filter
Top Products
Seats
&
Restraint Systems
Securing a Child Restraint
in a Rear Outside Position
(Two
Door
Models)
(CONI)
6.
Push and
pull
the child restraint
in
different directions to be sure
it
is
secure.
To remove the child restraint, just
unbuckle the vehicle’s safety belt and
let
it
go back all
the
way. The safety belt
will
move freely again and be ready to work
for an adult or larger child Dassenzer.
Securing a Child Restraint
in a Rear Outside Position
(Four
Door
Models)
If you have a two door model, see
“Securing a Child Restraint
in
a Rear
Outside Positions (Two Door Models)’’
earlier
in
this part.
You’ll
be using
the
lap-shoulder belt. See
the earlier section about the top strap
if
the child restraint has one.
1.
Put the restraint on the seat. Follow
the instructions for the child restraint.
2.
Secure the child
in
the child restraint
as the instructions say.
3.
Pick up
the
latch plate, and run the lap
and shoulder portions of the vehicle’s
safety belt through or around
the
restraint. The child restraint
instructions
will
show you how.
If the shoulder belt goes
in
front of the
child’s face or neck, put it behind the
child restraint.