Filter
Top Products
Tail/Stop/Turn Signal
Bulb
Replacement
See “Replacement Bulbs”
in
the Index to
check the type of bulb to use.
To
Replace a
Bulb:
1.
Open the trunk. Remove the
convenience net if you have one.
Remove the carpet fasteners by
twisting them a little as you pull them
away from the carpet.
2.
Pull the carpet away from the rear of
the vehicle.
3.
Unscrew the three wing nuts and pull
the light assembly from the vehicle.
4.
5.
6.
7.
8.
9.
To remove a socket with a tab, press
the tab,
turn
the socket
counterclockwise and pull it out.
To
remove the other sockets, just turn
them counterclockwise and pull
them out.
Pull the bulb out. Do not twist
it.
Push the new bulb into the socket.
Replace the socket
in
the light
assembly.
Tighten the socket (both kinds) by
turning
it
clockwise.
Replace the carpeting and fasteners.
183...