Filter
Top Products
Service
&
Appearance Care
*
.
Back-up Light Bulb
Replacement
See “Replacement Bulbs”
in
the Index
to
:heck the size and type
of
bulb
you
need
o
use.
To Replace
the
Bulb:
I.
Open the trunk and move the carpet
away from the back of the vehicle.
2.
Remove both tail/stop/turn signal
assemblies as described earlier in this
section.
3.
Remove the four wing
nuts
behind
tht
back-up assembly.
4.
Pull the back-up light assembly from
the vehicle.
5.
Push the tab on
the
socket and turn the
socket counterclockwise.
6.
Pull
the
socket from the back-up
assembly.
7.
To
remove
the
bulb, pull
it
out
of
the
socket. Do not twist the bulb.
8.
Push the new bulb into the socket.
9.
Reverse steps
1-5
to replace
the
light
assemblies.
Windshield Wiper Blade
Replacement
Replacement blades come in different
types and are removed
in
different ways.
Here’s how
to
remove the type with a
release clip:
1.
Pull
the windshield wiper arm away
from the windshield.
2. Lift the release clip with a screwdriver
and pull
the
blade assembly off
the
wiper arm.
3.
Push the new wiper blade securely
on
the
wiper arm.