Filter
Top Products
2.
Slide the guide under and past the
belt. The elastic cord must be under
the belt. Then, place the guide over
the belt, and insert the two edges of
the belt into the slots
of
the guide.
3.
Be sure that the belt is not twisted and
it lies flat. The elastic cord must be
under the belt and the guide on top.
4.
Buckle the belt around the child, and
make sure that both the lap belt and
the shoulder belt are secured properly.
Make sure that the shoulder belt
crosses the shoulder. See “Safety
Belts, Rear Seat Passengers’’ in the
Index.
To remove and store the comfort guides,
just perform these steps
in
reverse order.
Squeeze the belt edges together
so
that
you can take them out from the guides.
Pull the guide upward to expose its
storage clip, and then slide the guide onto
the clip. Rotate the guide and clip inward
and in between the seatback and the
interior body, leaving only the loop of
elastic cord exposed.
29..
.