Filter
Top Products
SKU 91315 For technical questions, please call 1-800-444-3353. Page 2
SPECIFICATIONS
Electrical Requirements
220V / 50-60 Hz, 12 FLA / Duty Cycle: 5 min,
2 HP / Single Phase, Dedicated 20A circuit required
Requires a single phase, 3-prong 250V/20A (NEMA L6-20P) power plug (not
included).
Maximum Lifting
Capacity
6000 Pounds (48” Mid-Rise Scissor Lift)
Minimum Lift Height 7” At Pads
Maximum Lift Height 4
1
/
2
’ At Pads
Overall Dimensions 99
3
/
4
” L x 39
1
/
2
” W x 7” H (Fully Lowered)
Piston Rod Travel 20
1
/
2
”
Pump Type Hydraulic/Electro w/Steel Dolly
Pump Hydraulic Oil
Capacity/Type
6.5 Quarts
ISO VG 32 Hydraulic Oil
(Extreme temperature conditions may require an oil with a different
viscosity – consult a qualied technician.)
Weight 849 Pounds
UNPACKING
When unpacking, check to make sure all the parts shown on the Parts Lists
on pages 17, 18, and 19 are included. If any parts are missing or broken, please
call Harbor Freight Tools at the number shown on the cover of this manual as soon as
possible.
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures, parts list and assembly
diagram. Keep your invoice with this manual. Write the invoice number on the inside
of the front cover. Keep this manual and invoice in a safe and dry place for future
reference.
GENERAL SAFETY RULES
WARNING! Read all instructions
Failure to follow all instructions listed below may result in electric shock,
re, and/or serious injury. The term “power tool” in all of the warnings listed
below refers to your line-operated (corded) power tool or battery-operated
(cordless) power tool.
SAVE THESE INSTRUCTIONS
REV 05l, 06k, 07j