Filter
Top Products
Trip
- 17 - - 18 -
3. If you choose the Points of
Interest tab, enter a City, State
or a ZIP Code and click the
Find button.
You can specify search
parameters by selecting a POI
Category and/or Type (this
will speed up the search).
3a. Highlight a selection, click
Select, then Add Stop.
When all your stops have
been entered, click Select
Data.
4. By default a 20 mile radius
around all stops and a width of
4 miles along the corridor
which connects them will be
highlighted. Note: CoPilot’s
available memory calculations
subtract 15 MB from the avail-
able memory on your storage
card (If you are using one) to
account for support files.
5. To customize these
distances for any trip, click
Options and type a distance
in the appropriate box.
6. You will return to the Data
Selection Menu where you can
select another data area if you
like, using any method. When
you are finished selecting data
areas, click Download. Trip
itineraries that were created
using the Trip download
method will be transferred
along with map data. See p. 20.
1. Click the Tri p icon.
2. You now have three options for
entering stops on your trip. If
you choose the Cities and
Addresses tab you will need to
enter a City, State or ZIP
code, press <Enter>, and click
the Add Stop button.
You may enter one or multiple
destinations. Use the buttons
to the right of the Itinerary to
zoom to a stop on the map,
change the order of stops, or
delete a stop.