CorCor
CorCor
Cor
vv
vv
v
ette C5 Fette C5 F
ette C5 Fette C5 F
ette C5 F
rr
rr
r
ont Axle Kont Axle K
ont Axle Kont Axle K
ont Axle K
itit
itit
it
Note: It is important to read and understand this ENTIRE installation manual, includingNote: It is important to read and understand this ENTIRE installation manual, including
Note: It is important to read and understand this ENTIRE installation manual, includingNote: It is important to read and understand this ENTIRE installation manual, including
Note: It is important to read and understand this ENTIRE installation manual, including
the bed-in procedure, before starting the installation.the bed-in procedure, before starting the installation.
the bed-in procedure, before starting the installation.the bed-in procedure, before starting the installation.
the bed-in procedure, before starting the installation.
Kit ContentsKit Contents
Kit ContentsKit Contents
Kit Contents
Your StopTech Big Brake kit includes the following:
1 pair of ST-40 four-piston calipers, sized specifically for your vehicle
1 set of high-performance street pads (not suitable for track use)
1 pair of 355 x 32mm two-piece rotor assemblies
1 pair of aluminum caliper adapter brackets
2 pair of 7/16-20 self-locking Jet nuts
2 pair of 12mm washers
1 pair of stainless steel brake lines
1 pair of banjo bolts
2 pair of copper crush washers
1 pair of rubber end caps
1 caplet of Loctite 262
TT
TT
T
ools and Eools and E
ools and Eools and E
ools and E
quipment Rquipment R
quipment Rquipment R
quipment R
equirequir
equirequir
equir
eded
eded
ed
Note: Different models and years of vehicle use different-sized fasteners, and every effort hasNote: Different models and years of vehicle use different-sized fasteners, and every effort has
Note: Different models and years of vehicle use different-sized fasteners, and every effort hasNote: Different models and years of vehicle use different-sized fasteners, and every effort has
Note: Different models and years of vehicle use different-sized fasteners, and every effort has
been taken to correctly identify the proper sized tool for each step of the installation. Occa-been taken to correctly identify the proper sized tool for each step of the installation. Occa-
been taken to correctly identify the proper sized tool for each step of the installation. Occa-been taken to correctly identify the proper sized tool for each step of the installation. Occa-
been taken to correctly identify the proper sized tool for each step of the installation. Occa-
sionallysionally
sionallysionally
sionally
, ho, ho
, ho, ho
, ho
ww
ww
w
evev
evev
ev
erer
erer
er
, manufactur, manufactur
, manufactur, manufactur
, manufactur
ers use alterers use alter
ers use alterers use alter
ers use alter
nate fasteners, so itnate fasteners, so it
nate fasteners, so itnate fasteners, so it
nate fasteners, so it
’’
’’
’
s advisable to check that eachs advisable to check that each
s advisable to check that eachs advisable to check that each
s advisable to check that each
tool correctly fits the fastener before loosening or tightening it.tool correctly fits the fastener before loosening or tightening it.
tool correctly fits the fastener before loosening or tightening it.tool correctly fits the fastener before loosening or tightening it.
tool correctly fits the fastener before loosening or tightening it.
The following tools and equipment will be needed:
21mm wrench or socket (1/2” drive suggested)
14mm wrench or socket
13mm flare wrench
11mm box wrench
11/16” wrench
1/2” wrench or socket (3/8” drive suggested)
Torque wrenches capable of 10-125 lb-ft settings
5mm Allen (hex) wrench
Needle-nose or small standard pliers
Coarse file or power grinder
Anti-seize compound
Small drip tray or several rags
Small funnel or suitable means of filling master cylinder reservoir
Brake bleed bottle
Plastic or non-marring mallet
1 pair of jack stands or other means of supporting vehicle
DOT 3 or 4 Brake Fluid (Check manufacturer’s recommendation for compatibility. StopTech rec-
ommends flushing brake fluid every one-to-two years, or more often under severe usage conditions.
If not done recently, the installation of a brake kit is an excellent opportunity to refresh your brake
fluid, or to upgrade to a higher-performance fluid, such as Motul 600.)
3541 Unit A, Lomita Boulevard, Torrance, CA 90505 (310) 325-4799
www.stoptech.com 6
