SS
SS
S
tep 4tep 4
tep 4tep 4
tep 4
Install Caliper BracketInstall Caliper Bracket
Install Caliper BracketInstall Caliper Bracket
Install Caliper Bracket
3541 Unit A, Lomita Boulevard, Torrance, CA 90505 (310) 325-4799
www.stoptech.com 10
Install the caliper bracket, using the stock cali-
per mounting bolts, with the bracket mounted
on the outboard side of the mounting lugs, and
the bolts inserted from the inboard side.
Remove the Jet nuts and washers from the caliper
mounting bracket, and put them aside for later
use.
Tighten the caliper bracket bolts, using a 21mm
wrench or socket, then torque the bolts to
125125
125125
125
lb-ftlb-ft
lb-ftlb-ft
lb-ft.
Place a few drops of the supplied Loctite 262 on
the threads of each stock caliper bolt.
