C. Traps and MIBs
C-40
August 2002 4200-A2-GB20-00
pdnSyslogSeverityThreshold Specifies the minimum severity level that
syslog messages can be sent.
Valid values are:
emergency(0): System is
unusable
alert(1): Action must be taken
immediately
critical(2): Critical conditions
error(3): Error conditions
warning(4): Warning conditions
notice(5): Normal, but significant
condition
info(6): Informational messages
debug(7): Debug-level
messages
pdnSyslogRemoteDaemon Enables or disables syslog messages going
to a remote daemon.
Valid values are:
Disable(1)
Enable(2)
pdnSyslogNumber A sequentially increasing index of syslog
messages starting at 1. The index is reset to
1upon device reset or when the table is
cleared (using pdnSyslogClearTable).
Integer.
pdnSyslogMessage The text of the syslog message. Octet string.
pdnSyslogNumOfMsgInTable Specifies the number of syslog messages
currently in the syslog table.
Integer.
pdnSyslogMaxTableSize The maximum number of syslog messages
the syslog table can hold.
Integer.
pdnSyslogClearTable Clears all the entries in the syslog message
table.
Valid values are:
noOp(1)
clear(2)
pdnSyslogMsgToConsole Allows messages to be sent to the device’s
console port. For debugging only.
Valid values are:
Disable(1)
Enable(2)
pdnSyslogRateLimiting Enables or disables rate limit timing. Valid values are:
Disable(1)
Enable(2)
Table C-17. Paradyne Syslog MIB Objects (2 of 2)
Object Description Setting/Contents
