C. Traps and MIBs
C-36
August 2002 4200-A2-GB20-00
Paradyne Enterprise MIBs
The following Paradyne Enterprise MIB Objects are supported:
Paradyne DSLAM System MIB (pdn_dslam.mib)
Paradyne Security MIB (pdn_Security.mib)
Paradyne Syslog MIB (pdn_syslog.mib)
Paradyne Health and Status MIB (mpe_HealthAndStatus.mib)
Paradyne Control MIB (mpe_Control.mib)
and
Paradyne Control MIB (pdn_Control.mib)
Paradyne Configuration MIB (mpe_Config.mib)
and
Paradyne Configuration MIB (pdn_Config.mib)
Paradyne Time MIB (pdn_Time.mib)
Paradyne mpe_ATMConf.mib
Paradyne ReachDSL MIB (pdn_reachDSL.mib)
Paradyne DS1 Config MIB (RFC 2495)
and
Paradyne DS1 Extension MIB
Paradyne DSLAM System MIB (pdn_dslam.mib)
Support for the pdn_dslam.mib is provided to enable an NMS to access certain
objects specific to a DSLAM. The objects listed in Table C-15, Paradyne DSLAM
System MIB Objects, are supported.
Table C-15. Paradyne DSLAM System MIB Objects (1 of 3)
Object Description Setting/Contents
loginUserId Shows the 10 most recent logins and
all active users currently accessing the
device. It also keeps a record of the
access application, user privileges, and
log-in status.
Read only.
loginTime Describes the access application used
by the end user to access the device.
Read only. Valid values are:
console(1)
telnet(2)
ftp(3)
web(4)
modem(5)
loginAccessHost Contains the IP address of the NMS
station when the access application is
Telnet or FTP.
Read only.
