14. System Commands
4200-A2-GB20-00 August 2002
14-21
RTRV-META-CMD
The RTRV-META-CMD command retrieves a specific or a list of all TL1
commands.
Response Format
If, in less than 2 seconds, a normal or error response cannot be sent, the following
acknowledgment response will be sent:
IP c
After the above response, a new command input may be generated.
Normal Response:
sid yy-mm-dd hh:mm:ss
M c COMPLD
/* RTRV-META-CMD:[tid]:[cmd]:[ctag]; */
;
Error Response:
sid yy-mm-dd hh:mm:ss
M c DENY
/* RTRV-META-CMD:[tid]:[cmd]:[ctag]; */
aid:ERRCDE=errcde
/* error description */
;
Table 14-19. RTRV-META-CMD Command Parameters
RTRV-META-CMD:[tid]:[cmd]:[ctag][:];
RESTRICTION: All parameters in this command are position-defined.
[tid] Identification of the target NE. The default value is null. The NE SID
code is the only other valid value.
cmd The command value. Valid values are:
– NULL: Retrieve all commands
– command name: Retrieve that specific command.
[ctag] Correlation tag (6 characters maximum) that links an input command
with associated output responses. The default is 0.
