Effective 4/00
Page 31
IL 33-FX6-1
Step Description Style No. Qty. Comment
.138 Lock Washer Stl. 2 CPT Only, From Step 7
Ring Terminal (.138) 4
Step 10 HV Wire Connecting Parts 9A10010G11 1
Retaining Plate 1
.250-20 × .500 Lng. Hex Bolt 1 CPT Only
.250 Flat Washer Stl. 1
.250 Lock Washer Stl. 1
Ring Terminal (.250) 2 From Step 7
Step 11 Sensors See Pick List 3
Step 12 External Harness 6502C83G__ 1
External Harness Mounting Parts 9A10010G12 1
.164-32 × .312 Lng. Screw Fil. 2
.164 Flat Washer Stl. 2
.164 Lock Washer Stl. 2
Wire Clamp Nylon 2
Wire Tie Nylon 12
Aux. Switch Kit 9A10010G02 1
Microswitch 1
Mounting Bracket 1
.190-16 × .500 Lng. Screw T. C. 2
.190 Flat Washer Stl. 2 Comm. Only
.190 Lock Washer Stl. 2
.138-32 × 1.00 Lng. Screw Fil. 2
.138 Flat Washer Stl. 4
.138 Lock Washer Stl. 2
.138-32 Nut Hex Stl. 2
Step 13 CPT Voltage Label 1 CPT Only, From Step 7
Step 15 Cell Harness 6503C57G__ 1 Except 510 Basics
NOTE: Due to the wide variety of Breakers and the multiple functions of the Retrofit components, some
excess hardware may remain when the Retrofit is complete.
Step 9
(Cont.)
