Effective 4/00
IL 33-FX6-1
Page 12
B. Align the CPT Assembly with the holes drilled
in the left Breaker Frame in Step 5-C. Secure
the CPT Assembly to the Breaker, as shown,
using the (2) .250-20 × .625" bolts, (2) lock
washers, (4) flat washers, and (2) nuts supplied.
STEP 8: PREPARING THE TRIP UNIT
ASSEMBLY
Fig. 18 CPT Assembly Mounted in the Breaker
Fig. 19 Overview: Trip Unit Assembly Prepared
for Installation
A. Align the Aux. CT Module Mounting Brackets,
as shown, with the holes in the Trip Unit
Mounting Platform. Secure the Brackets to the
Mounting Platform using the (4)
.190-32 × .500" screws, (4) lock washers, (8)
flat washers, and (4) nuts supplied. Note that
the screws are inserted through the Trip Unit
Mounting Platform first.
Fig. 20 Aux. CT Mounting Brackets Attached to
the Trip Unit Mounting Platform
