A SERVICE OF

logo

Effective 4/00
Page 25
IL 33-FX6-1
STEP 13: REINSTALLING THE ORIGINAL
BREAKER FRONT COMPONENTS
Fig. 57 Overview: Original Front Components
Installed on the Breaker
A. Using the original mounting hardware, reinstall
the Breaker Front Box.
B. For Kits Supplied with a Breaker Mounted CPT
Only: Attach the appropriate CPT Voltage
Warning Label for the Breaker on the outside of
the Front Box Cover. If the Retrofitter opts to
attach this label in a different position, it must
be in a prominent position.
208V
CONTROL POWER TRANSF. TAPS
H1–H4=480V H1–H3=240V
H1–H2=208V
WARNING
THIS BREAKER CONTAINS A 20VA
CONTROL POWER TRANSFORMER
FOR TRIP UNIT DISPLAY. IF BREAKER
IS USED ON A LINE VOLTAGE OTHER
THAN SHOWN. THE CPT TAPS MUST
BE CHANGED BEFORE ENERGIZING.
FAILURE TO DO SO WILL RESULT IN
DAMAGE TO THE TRIP UNIT AND / OR
CONTROL POWER TRANSFORMER
NP# 8153A05H03
240V
CONTROL POWER TRANSF. TAPS
H1–H4=480V H1–H3=240V
H1–H2=208V
WARNING
THIS BREAKER CONTAINS A 20VA
CONTROL POWER TRANSFORMER
FOR TRIP UNIT DISPLAY. IF BREAKER
IS USED ON A LINE VOLTAGE OTHER
THAN SHOWN. THE CPT TAPS MUST
BE CHANGED BEFORE ENERGIZING.
FAILURE TO DO SO WILL RESULT IN
DAMAGE TO THE TRIP UNIT AND / OR
CONTROL POWER TRANSFORMER
NP# 8153A05H02
480V
CONTROL POWER TRANSF. TAPS
H1–H4=480V H1–H3=240V
H1–H2=208V
WARNING
THIS BREAKER CONTAINS A 20VA
CONTROL POWER TRANSFORMER
FOR TRIP UNIT DISPLAY. IF BREAKER
IS USED ON A LINE VOLTAGE OTHER
THAN SHOWN. THE CPT TAPS MUST
BE CHANGED BEFORE ENERGIZING.
FAILURE TO DO SO WILL RESULT IN
DAMAGE TO THE TRIP UNIT AND / OR
CONTROL POWER TRANSFORMER
NP# 8153A05H01
600V
CONTROL POWER TRANSF. TAPS
H1–H4=480V H1–H3=240V
H1–H2=208V
WARNING
THIS BREAKER CONTAINS A 20VA
CONTROL POWER TRANSFORMER
FOR TRIP UNIT DISPLAY. IF BREAKER
IS USED ON A LINE VOLTAGE OTHER
THAN SHOWN. THE CPT TAPS MUST
BE CHANGED BEFORE ENERGIZING.
FAILURE TO DO SO WILL RESULT IN
DAMAGE TO THE TRIP UNIT AND / OR
CONTROL POWER TRANSFORMER
NP# 8153A05H04
Fig. 58 Supplied CPT Voltage Labels