Indicator pattern Description
Solid blue The storage sled is powered on, and is operating
normally.
Blinking blue The compute sled to which the storage sled is
mapped, is identified.
Blinking amber The storage sled or any component inside the
storage sled is in fault condition.
Hard drive/SSD indicators
The hard drive/SSD indicators are located on top of the drive drawer. There is a single status/activity
indicator for each drive slot.
Figure 3. Hard drive/SSD indicators
1. hard drive/SSD indicator 2. hard drive/SSD release tab
Drive-Status Indicator Pattern Description
Off Drive slot empty
Steady green Drive online, but no activity
Blinks green and turns off Drive online with drive activity
Blinks green (On 250 ms Off 250 ms) Drive being identified or preparing for removal
Blinks green (On 400 ms Off 100 ms) Drive rebuilding
Blinks amber (On 150 ms Off 150 ms) Drive failed
Blinks green (500 ms), amber (500 ms), and turns
off one second
Drive predicted failure
Blinks green three seconds, turns off three
seconds, blinks amber three seconds, and turns off
three seconds
Drive rebuild aborted
Storage controller card indicators
The storage controller card indicators are located on top of the drive drawer.
7
