1. Ensure that you read the Safety instructions.
2. Keep the #1 Phillips screwdriver ready.
Steps
1. Pull the drive drawer handle on the front panel of the storage sled, and keep it in open position.
2. Remove the screw securing the Mini Enterprise Service Tag (MEST) to the sled front panel.
3. Remove the MEST from the sled.
Figure 23. Removing and installing the MEST
1. screw 2. MEST
Next steps
Install the MEST.
Related Links
Installing the Mini Enterprise Service Tag
Installing the Mini Enterprise Service Tag
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
NOTE: This is a field replaceable unit (FRU). Removal and installation procedures must be performed
only by Dell certified service technicians.
1. Ensure that you read the Safety instructions.
2. Keep the #1 Phillips screwdriver ready.
3. Remove the Mini Enterprise Service Tag (MEST).
27
