Filter
Top Products
Periodic maintenance and adjustment
75
1. Remove the shroud, the left and right
side covers, and the top cover. (See page
46 for removal procedures.)
2. Remove the headlight unit bolts, discon-
nect the headlight couplers and multi-
function meter unit coupler, and then re-
move the headlight unit.
3. Unhook the air filter case fastener and
disconnect the air temperature sensor
coupler.
4. Loosen the joint clamp bolts.
5. Slide the clamps away from the air filter
case, and then disconnect the crankcase
breather hose and the bypass air hose.
6. Slide the clamp down, and then discon-
nect the air filter case drain hose.
7. Remove the air filter case.
1. Headlight unit bolt
1. Fastener
2. Air temperature sensor coupler
1 1
1. Joint clamp bolt
1. Crankcase breather hose clamp
2. Bypass air hose clamp
3. Crankcase breather hose
4. Bypass air hose
1. Air filter case drain hose clamp
2. Air filter case drain hose
U8FP15E0.book Page 75 Thursday, July 23, 2009 11:01 AM