Filter
Top Products
Control functions
18
ESU10661
Headlight beam switch
“LIGHTS”
Push the headlight beam switch to change the
headlight to high beam “HI” or to low beam
“LO”.
ESU12651
Grip/thumb warmer adjustment
switch
The grip warmer adjustment switch and the
thumb warmer adjustment switch control the
electrically heated handlebar grips and throt-
tle lever respectively.
To raise the temperature, press the respec-
tive switch to “HI”. To lower the temperature,
press the switch to “LO”. (See page 14 for
more information.)
ESU13683
Auxiliary DC jack
The auxiliary DC jack is located in the front
panel and can be used for accessories.
TIP
The auxiliary DC jack can only be used if the
engine is running.
To use the auxiliary DC jack
1. Start the engine.
2. Open the auxiliary DC jack cap, and then
insert the accessory power plug into the
jack.
1. Headlight beam switch “LIGHTS”
2. High beam “HI”
3. Low beam “LO”
1. Grip warmer adjustment switch
1. Thumb warmer adjustment switch
1. Auxiliary DC jack cap
2. Auxiliary DC jack
U8FP15E0.book Page 18 Thursday, July 23, 2009 11:01 AM