Filter
Top Products
Control functions
20
TIP
When the brake lever is squeezed, the brake
light comes on.
The brake lever is equipped with a position
adjuster.
To adjust the brake lever position:
1. Loosen the locknut.
2. While lightly pushing the brake lever in di-
rection (a), turn the adjusting bolt to set
the brake lever to the desired position.
3. Tighten the locknut securely after adjust-
ing the brake lever position.
ESU10581
Parking brake lever
When parking the snowmobile or starting the
engine, apply the parking brake by moving the
parking brake lever to the left.
To release the parking brake, move the park-
ing brake lever to the right.
ESU10592
Shift lever
The shift lever is used to put the snowmobile
into forward or reverse. After coming to a
complete stop, pull the shift lever out, slide it
to “FWD” or to “REV” until it stops, and then
release it.
1. Brake lever
1. Locknut
2. Adjusting bolt
1. Parking brake lever
1. Shift lever
1
U8FP15E0.book Page 20 Thursday, July 23, 2009 11:01 AM