Filter
Top Products
Periodic maintenance and adjustment
80
RS90GT / RS90LTGT / RST90GT
5. Remove the bottom panel by removing
the bolts.
6. Place an oil pan under the oil tank to col-
lect the used oil.
7. Disconnect the oil level gauge coupler.
RS90GT / RS90LTGT / RST90GT
RST90
8. Remove the oil filler cap and the cylinder
head cap, and then remove the engine oil
drain bolt and its gasket to drain the oil
from the oil tank.
RS90GT / RS90LTGT
RST90
1. Screw
2. Right lower cover
1. Bolt
2. Bottom panel
1. Oil level gauge coupler
2. Oil filler cap
1
2
2
1
2
1
1. Oil level gauge coupler
2. Oil filler cap
1. Cylinder head cap
1. Cylinder head cap
1
U8JA11E0.book Page 80 Monday, June 14, 2010 10:22 AM