Filter
Top Products
Control functions
24
To raise the temperature
To raise the temperature, press the respec-
tive switch to “HI”.
To lower the temperature
To lower the temperature, press the respec-
tive switch to “LO”.
See “Fuel meter and grip/thumb warmer level
indicator” on page 18 for detailed information.
ESU10696
Auxiliary DC jack
The auxiliary DC jack is located in the front
panel and can be used for accessories.
TIP
The auxiliary DC jack can only be used if the
engine is running.
To use the auxiliary DC jack
1. Start the engine.
2. Open the auxiliary DC jack cap, and then
insert the accessory power plug into the
jack.
RS90GT / RS90LTGT / RST90GT
RST90
3. After using the auxiliary DC jack, be sure
to remove the accessory power plug from
the jack and to close the auxiliary DC jack
cap.
NOTICE
ECS00122
● To avoid circuit overload and a possible
fuse blowing, do not use accessories re-
quiring more than the maximum rated
capacity for the auxiliary DC jack. (See
page 109 for the specified fuse amper-
age.)
● Do not use an automotive cigarette light-
er or other accessory with a plug that
gets hot because the jack can be dam-
aged.
1. Thumb warmer adjusting switch
1. Auxiliary DC jack cap
2. Auxiliary DC jack
1. Auxiliary DC jack cap
2. Auxiliary DC jack
1
2
U8JA11E0.book Page 24 Monday, June 14, 2010 10:22 AM