Filter
Top Products
Periodic maintenance and adjustment
76
5. Remove the air filter case cover by un-
hooking the fasteners.
6. Lift up the air filter element frame and
check the air filter element. If there is any
snow on the air filter element, remove the
element, brush off the snow, and then in-
stall the air filter element.
7. Place the air filter element frame in the
original position, and then install the air
filter case cover by hooking the fasteners.
8. Install the headlight unit, making sure to
fit the slots on its bottom onto the projec-
tions on its stay.
9. Fit the weatherstrip on the headlight unit
into the recess in the top of the air filter
case cover.
1. Headlight unit
1. Air filter case cover fastener
1. Air filter element frame
1
1
1
1
1. Slot
2. Projection
1. Weatherstrip
1
2
1
U8JA11E0.book Page 76 Monday, June 14, 2010 10:22 AM