Filter
Top Products
Feature Details
35
© 2009 Directed Electronics. All rights reserved.
Alarm Features
Normal Arm Protection
Status LED: The Control Center Status LED flashes as a visual indicator
that your vehicle’s security system is active.
Starter Kill: The Failsafe starter kill relay prevents the engine from
starting
Note
May require additional parts and installation
Sensor triggers: The onboard shock sensor can distinguish minor im-
pacts from major impacts to the vehicle exterior. Minor impacts causes
the system to emit a Warn-away output by chirping the siren and
flashing the parking lights for 3 seconds. Major impacts caused for
example by a forcible entry attempt, results in a Full Trigger output. The
siren sounds and the lights flash for 30 seconds or longer. Both Warn-
away and Full Triggers send a message to the remote control.
Point of entry triggers: Opening the Hood or Trunk causes a Full Trig-
ger output, while opening a Door or turning on the Ignition causes the
the siren to chirp 3 seconds before beginning the Full Trigger output.
This 3 second delay allows time to disarm and silence the siren in
case of accidental trigger. The Full Trigger message is still sent to the
remote.
Sensor Silent Arm protection
Sensor warn-away and Sensor full trigger activations only send mes-
sages to the remote, while the vehicle’s light flash and siren outputs
are defeated. Point of entry triggers will activate the light flash, siren,
and send messages normally.