Filter
Top Products
12
© 2009 Directed Electronics. All rights reserved.
Basic commands (function level 1)
Arm
Press and release
The alarm arms, doors lock (if connected), and the siren chirps and
lights flash once. The
ARMED
animation and beeps play to confirm. If
Valet mode* is On the doors lock and the
LOCKED (IN VALET)
anima-
tion and tone play. Exit Valet mode to arm the alarm normally.
If a trigger zone fault is detected the siren chirps once again and the
Trigger Zone Fault report** plays.
To Arm and Panic
Press and hold
The alarm Arms (or Locks in Valet) and, after 2 seconds, sounds
the siren and flashes the lights. The
PANIC
animation and siren
tones play to confirm. Press the
or button to stop the out-
put.
AUX/Trunk
Press and hold
AUX
The Trunk opens (if connected) when this button is pressed for 2 sec-
onds. The
TRUNK RELEASE
animation and tones play to confirm.
* See Remote and System Operations section for details.
** See
Alarm Features for details.