Filter
Top Products
28
© 2009 Directed Electronics. All rights reserved.
ready the
NO FUNCTION ASSIGNED
screen and tone plays, return
to Step 1.
Press3. the menu wheel to enter the
Low Temp Start
field or
toggle and press to enter the High Temp Start field.
To adjust and save new settings follow the on-screen instruc-4.
tions.
Menu Wheel:s Toggle to adjust the setting up/down. Press
to save new settings and go back to the Adjustments feature
menu.
s or : Press to adjust the setting up/down.
AUX
s : Press to reset the setting to default.
s : Press to delete new settings and go back to the Adjust-
ment feature menu.
* See Remote Start Features for more details.
Adjusting Battery Level:
The battery level threshold for the Smart Start feature is preset to
On-10.5 volts; your authorized Directed dealer can adjust this setting
within the 9 to 12 volt range or to Off.
Remote Pair
Remote Pair is a process where the Responder HD and the system in
the vehicle learn each others encrypted identification, securing their
communication from intruders. Please note that your remote controls
come pre-programmed from the factory.
How to Remote Pair
Make sure the remote control is set for the desired Car 1 or Car 2
operation for the system it is to be paired with.