BLUETOOTHா HANDS-FREE PHONE SYSTEM (Navigation System
only – if so equipped)
With an overhead microphone and sound
transmitted through the audio system
speaker, the Bluetoothா Hands-Free Phone
System utilizes Bluetoothா wireless technol-
ogy, touch-screen, and voice recognition to
provide hands-free cellular phone communi-
cation.
SYSTEM OPERATING TIPS
Ⅲ Close all windows. Surrounding noises
may interfere with system operation and
performance.
Ⅲ Press the
button on the steering wheel to activate voice recognition.
Ⅲ Waitfor the “Would you liketo access Phone, Navigation, Information,or Help?”prompt
and the listening tone before speaking.
Ⅲ Begin speaking a command within 1.5 seconds of the listening tone.
Ⅲ To cancel a voice recognition session, press and hold the
button for 2 seconds.
Ⅲ To increaseor decrease thevolume ofthe voiceprompts, push theVOL (volume)control
switch upor downon the steeringwheel orturn the ON·OFF/VOL(volume) knobon the
audio system while the system is responding.
Ⅲ Speak in a clear and natural voice without pausing between words.
Ⅲ Some commands are not available while the vehicle is in motion.
Ⅲ The “Help” command will bring up the voice recognition command list.
Ⅲ Please refer to the cellular phone manufacturer owner’s manual for detailed information
regarding your Bluetoothா phone.
Ⅲ For recommended phones and detailed instructions, please visit
www.nissanusa.com/bluetooth .
PAIRING YOUR PHONE
Before using the hands-free feature, youneed to set up, or pair, the system torecognize your
compatible cellular phone(s). Five Bluetoothா-enabled phones can be paired. After setup,
the system automatically connects with a paired phone when the ignition switch is in the
ACC or ON position, as long as the phone is on and in the vehicle.
30