Filter
Top Products
VEHICLE INFORMATION DISPLAY
When the INFO button ispressed, the following modes will display
on the screen:
Ⅲ Warnings (if there are any)
Ⅲ Range (average distance to empty)
Rotate the dial
to highlight the desired mode. Press the INFO
button to enter the highlighted mode.
INSTRUMENT BRIGHTNESS CONTROL/TRIP CHANGE BUTTON
Ⅲ The instrument brightness control operates when the headlight
control switch is in the
or position.
Ⅲ Turn the control to adjust the brightness of the instrument panel
lights.
Ⅲ Press the change button to select trip computer features.
AUTOMATIC DRIVE POSITIONER (if so equipped)
The automatic driver positioner system has two features:
Ⅲ Memory storage function.
Ⅲ Entry/exit function.
MEMORY STORAGE FUNCTION
Two positions for the driver’s seat, accelerator and brake pedals, and
outside mirrors can be stored in the automatic driver positioner memory.
Follow these procedures to set driver preferences.
SET THE DESIRED POSITIONING
1. Place the shift selector in the P (Park) position.
2. Place the ignition switch in the ON position and adjust the driver’s seat, accelerator and
brake pedals, and outside mirrors to the desired positions.
3. Press the SET (memory) button and within 5 seconds press the position button (1 or 2)
until the indicator light illuminates. The position is now stored in memory.
14