Filter
Top Products
Trek-725 User Manual 36
4.2.3 EBOOT configuration examples
Ex1: Launch on-board flash image
Do not enter the EBOOT Configuration menu, or in the EBOOT Config-
uration menu choose option (L) to launch the on-board flash image.
Ex2: Download a Windows CE image over Ethernet without pro-
gramming an image into Flash.
1. Set option (7) to DISABLE.
2. Choose option (D) to start downloading the image.
Ex3: Download Windows CE image from Ethernet and program this
image into Flash.
1. Set option (7) to ENABLE.
2. Choose option (D) to start downloading the image.
4.3 Upgrade Procedure
After the OS image has been built, we may want to burn it to the on-board
flash ROM. Advantech provides the upgrade utility
“UpgradeIXP_1.01.07.exe” to upgrade Bootloader image, WinCE image,
or boot logo in the on-board flash ROM. The upgrade procedure is as fol-
lows:
1. Copy the “UpgradeIXP_1.01.07.exe” utility and image files (for
example: NK.NB0, EBOOT.NB0, and WINDOWSCE.BMP) to a
CF storage card.
Note: NK.NB0 is a WinCE image, EBOOT.NB0 is a Bootloader image,
and WINDOWSCE.BMP is a boot bitmap.