Filter
Top Products
Trek-725 User Manual 14
Chapter 3 Hardware and Peripheral
Installation
3.1 Overview of Hardware Installation and Upgrading
The panel PC consists of a PC-based terminal that is housed in a rugge-
dized aluminum enclosure. Any maintenance or hardware upgrades can
be completed after removing both panels.
3.2 Main Board
3.2.1 Connector Layout
Figure 3.1: Connector layout of main board
Warning! Do not remove the ruggedized aluminum covers
until you have verified that no power is flowing
within the panel PC. Power must be switched off
and the power cord must be unplugged. Every
time you service the panel PC, you should be
aware of this.