Filter
Top Products
29 Chapter 4
4.2 Windows CE Startup Procedure
Windows CE can be loaded by three methods, through on-board flash,
PCMCIA/CF card, and Ethernet. The presence of an image file (NK.bin)
on a PCMCIA/CF card forces TREK-725 to boot from this PCMCIA/CF
card. Besides booting from PCMCIA/CF card, HyperTerminal can be
used to configure the method of downloading a Windows CE image by
connecting a null modem cable between a PC COM port and the TREK-
725 COM1 port then following these steps.
4.2.1 Setting up HyperTerminal on PC
1. Execute HyperTerminal
Figure 4.2: Execute HyperTerminal from Start Menu