Trek -725 Automobile Alarm User Manual


 
3 Chapter 1
1.2 General Specifications
Table 1.1: General Specifications
System kernel
CPU Intel IXP-420 533MHz on board
OS Windows CE .NET 5.0 Professional Version
SDRAM 64 MB SDRAM on board (extendable to 128 MB or
256 MB)
Flash 32 MB on board for image & customer applications
(extendable to 64 MB)
Buzzer Yes
RTC HT1381 backed up by 65 mAh Rechargeable Li-ion
battery
Display
LCD AUO 10.4" TFT LCD SVGA 800 x 600, 180 nits
Touch Screen Dynapro 4-wire Touch Screen
VGA Chip SM501 with external 8 MB VRAM
I/O
MiniPCI Yes (Driver verified ready for specific Wi-Fi 801.11b/g
module)
PCMCIA 2 x PCMCIA slot type II for CF card / Wi-Fi module
IDE Interface ready for CF slot or 2.5" HDD
CAN Bus 1 x CAN Bus via DB9 connector
COM Port 2 x full function transceiver-level external RS-232
ports (COM1 & COM2 DB9 connectors)
2 x TTL-level internal RS-232 (pin-header), reserved
for GPRS/GSM modules
USB 2 x USB 2.0 Host; 1 x USB 1.1 Client
Ethernet 1 x 10/100Base-T
Function Key 6 x function keys for customer configuration
Hot Key LCD brightness, LCD backlight On/Off, Page up/
down and enter
RF Communication
GPS Default built-in GPS for TREK-725R-GCEA0. The
other models have optional GPS.
GSM/GPRS Optional, please refer section 3.4
WLAN Optional, please refer section 3.4
Audio
Mic-in 1 x Mic-in jack (without record function)
Speaker Out 1 x Speaker out jack