Filter
Top Products
Optional Wiring Connections - 240 Volt Connector Plug
_1_ DANGER
All wiring connections should be done by a QUALIFIED electrician. Improper or unauthor-
ized wiring connections are not only dangerous, but may damage equipment. Wire gauge
sizes must be large enough to handle the maximum amperage load. All applicable elec-
trical codes must be complied with.
Ground
HOT HOT
240 Volts
A 240 volt, 4-prong, 20 amp connector plug is
included with the alternatoro If additional
plugs are required, refer to REPAIR PARTS
section of Owner's Manual. The 240 volt
outlet will supply both 120 volts a-c and 240
volts a-c, as shown above, when a 4-wire cable
is connected to the connector plug.
One method of connecting a 4-wire cable to
the connector plug, is to terminate the cable
at a connection box. See illustration above.
When a Stand-By kit is ordered, a 4-wire cord
set is included (see INSTALLATION OF
STAND-BY POWER SYSTEMS, page 4)_
Optional Wiring Connections - 120 Volt, 30 Amp Connector Plug
,==,.,...- I20 Volts ,,,....,.,,_,
/#i"
Ground
-2--
F" 3-Wlre
! Cable
L __1
A 120 volt, 3-prong, 30 amp connector plug is
included with the alternatoro if additional
plugs are required, refer to REPAIR PARTS
section of manual° A 3-wire cable must be pur-
chased and connected to the plug as shown
above.
One method of connecting a 3-wire cable is to
terminate the cable at an outlet box, as shown
above
11