Filter
Top Products
[ 14 ]
2
With your phone on or off, connect the lead from the
charger to the charging port located on the bottom of the
phone. The battery indicator bar appears on the screen and
starts to scroll up and down after a few seconds. With the
phone off, only the battery indicator bar will appear.
3
Disconnect the charger from the phone and AC outlet when
the battery is fully charged.
After the indicator bar stops scrolling, the battery is almost fully charged,
and is fully charged after an additional hour (approximately). The message
Battery Full
is displayed.
Note:
For best performance, charge the battery for 24 hours before
you use the phone. The charging time depends on the charger and
battery you use. For example, the charging time for the BLC-2
battery with the ACP-7U charger is approximately 4 hours.
Important:
Do not leave the battery connected to a charger for
more than 72 hours, since prolonged maintenance charging could
shorten its lifetime.
Remove the battery
Warning:
Use only your hands to remove the battery. Do not
puncture, burn or use any objects that may damage the phone
or the battery. Please recycle the battery, or dispose of properly.
You will need to remove the existing battery if you want to install a new
battery or if you have purchased a spare battery. Make sure the phone has
been turned off for ten seconds.
1
Remove the back cover of the phone as shown in step 1 on page 12.
2
Place your index finger in the
space at the bottom of the
battery, and press toward the
top of the phone.
3
Take out the battery.