Filter
Top Products
[ 96 ]
RECALL TOUCH TONE STRING FROM THE PHONE BOOK
1
During a call to the automated service, press
Options
, scroll to
Touch
tones
and press
Select
.
2
Press
Search
, scroll to the touch tone string entry in your phone book,
then press
OK
.
3
Press
Tones
to send the touch tones.
Store touch tone string with phone number
You can store touch tone strings (for example: voice mailbox number and
PIN code) as a part of a phone book entry. Once the string is stored, it is
sent automatically (instead of entering the touch tones from the keypad).
1
Enter the phone number of the automated service.
2
Use the
*
/+ key to enter a
w
(Press */+ four times) or
p
(Press #/+
three
times) after the number.
•
w
(wait) - The phone waits for you to press
Send
. When you press
Send
, the phone sends the touch tone string you have saved.
•
p
(pause) - The phone pauses for 2.5 seconds, then automatically
sends the touch tone string you have saved.
3
Enter the touch tone string after the
w
or
p
characters as required by
the service.
Example: 214-555-1234w1234#p5678#
4
Save this phone book entry as you normally would.
Once the touch tone string is stored with the phone number, you can now
call the number and have the touch tone strings sent automatically.
• LINK PHONE BOOK ENTRIES
This feature allows you to store a phone number in one phone book
location and link it to another phone book entry.
For example, linking the phone number of an automated service (example:
automated banking service) with a touch tone string entry in your phone
book (example: account and PIN numbers) automatically recalls and
sends the touch tone string when you call the service.