Filter
Top Products
[ 101 ]
Security and System settings
• PHONE LOCK
This feature protects your phone from unau-
thorized outgoing calls or unauthorized access
to information stored in the phone. When phone
lock is activated,
Phone locked
is displayed
each time you turn your phone on or off.
After pressing either
Contacts
or
Menu
, you
must enter your lock code. Once your lock
code has been accepted, your phone will
function normally.
Important: Call not allowed
is displayed if you attempt to place
a call while phone is locked.
Important:
When the phone is locked, calls may be possible to the
emergency number programmed into your phone (for example, 911
or other official emergency number).
Learn about the lock code
In addition to a security code, your phone also has a
lock code
. You will
need the lock code to activate and deactivate the phone lock feature, or to
change your lock code.
The default lock code is
1234
. If you enter an incorrect lock code five times
in a row,
your
phone will prompt you for the security code (see page 100).
CHANGE YOUR LOCK CODE
1
Enter
Menu 4-6-2-3
(
Settings
>
Security settings
>
Access codes
>
Change lock code
) and press
Select
.
2
Enter current (or default) lock code and press
OK
.
3
Enter new lock code and press
OK
.
4
Reenter new lock code for verification, then press
OK
.
Important:
When you change your lock code, make sure you store it
in a safe place, away from your phone. Avoid entering access codes
similar to emergency numbers to prevent accidental emergency calls.