Filter
Top Products
[ 113 ]
Organizer
•
Reset
- clears the current timing data and resets the timer.
•
Start
- restarts the split timer from the point the timer was stopped.
Time an event using lap timing
The lap time function allows you to measure the amount of time it takes
to complete a cycle or lap. To measure lap time:
1
From the
Organizer
menu, scroll to
Stopwatch
and press Select.
2
Scroll to
Lap timing
, then press
Select
.
3
Press
Start
. The running time appears on the display.
Once the lap timer has started, your can:
•Press
Stop
to stop the timer and view the elapsed time.
•Press
Lap
. The lap time is displayed and the timer restarts from zero.
If you continue pressing
Lap
, the most recent lap time appears at the top
of the list of lap times. You can scroll to review previous times.
Press
Stop
to stop the timer. The final lap’s time is displayed.
Choose other stopwatch options
You can choose the following options from the
Stopwatch
menu.
Note:
If you receive a call while using the Stopwatch, the timer
continues running in the background. After ending the call, you
can redisplay the timer by doing the following:
1
Press
Menu 10-4-1
(
Organizer
>
Stopwatch
>
Continue
).
2
Press
Select
.
Option Description
Continue Used to re-display active timer (example: if you receive
a call while the timer is still running).
Show last
time
Allows you to view the last measured time.
View times Allows you to view the list of saved times.
Delete
times
Allows you to delete the saved times. You can delete
the saved times one by one or all at once.