Filter
Top Products
Operation 29
Red
Only available when ‘User’ is selected and adjusts the red color
temperature.
The left and right buttons increase or decrease the value on a
sliding bar calibrated from 0-255. Any change occurs as the
buttons are pressed
Green
Only available when ‘User’ is selected and adjusts the green
color temperature.
The left and right buttons increase or decrease the value on a
sliding bar calibrated from 0-255. Any change occurs as the
buttons are pressed
Blue
Only available when ‘User’ is selected and adjusts the blue
color temperature.
The left and right buttons increase or decrease the value on a
sliding bar calibrated from 0-255. Any change occurs as the
buttons are pressed.
Input naming
This sub-menu enables you to rename any of the video input
signals.
To change an input name:
1. Use the up and down buttons to highlight the input name to
be changed.
2. Press ENT.
3. Use the up and down buttons to change the letter or number
value.
4. Use the left and right buttons to move to the next character
or select a previous one.
5. When you have finished, press ENT to accept the changes.
81277_1.book Page 29 Thursday, August 17, 2006 1:51 PM