Filter
Top Products
Operation 19
Operation
Introduction
Your Raymarine Sunlight Viewable display can be controlled
using the On Screen Display (OSD) menu and/or the 10 buttons
on the front bezel of the unit.
The OSD menu enables you to change the way in which your
display is set up and is accessed using the Menu button.
Using the buttons
Each of the 10 buttons on the front bezel of your display has an
input and a control function.
Input functions enable you to select the type of signal input to
the display.
Control functions enable you to change the appearance of the
display.
Power
Power ON
To power your monitor ON press and hold the
POWER button for 3 seconds.
Power OFF
To power your monitor OFF press and hold the
POWER button for 3 seconds.
Pressing the power button will display a list of what input for the
main screen is associated with each button. This is just a
reminder and is not part of the input selection process.
VGA 1/Menu
VGA 2/
Scroll DOWN
VGA 3/Scroll UP
DVI 1/Scroll LEFT
DVI 2/Scroll RIGHT
Composite Video 1/
PIP
Composite Video 2/
Brightness
Composite Video 3/
Night mode
S-Video/
Enter
POWER
81277_1.book Page 19 Thursday, August 17, 2006 1:51 PM