Filter
Top Products
22 Raymarine Sunlight Viewable Marine Displays - Users Guide
• PIP Image White Balance.
• PIP Image contrast.
• PIP Image Color.
• PIP Image Tint.
• PIP Image Sharpness.
On/Off
The left and right buttons toggle between On/Off. When ON, the
PIP appears. OFF, the PIP closes.
Input source
The left and right buttons toggle between all of the 9 inputs
allowed with one source name appearing at a time. Press ENT
to accept.
Note: Some video inputs cannot be viewed in the PIP source
when certain inputs are on the main screen. When this
occurs the message “Unsupported Input” will appear in
the PIP window.
To select an input source:
With the display powered ON, press the button corresponding to
the input source required for the main screen.
The selected source is shown in the bottom right-hand corner of
the display.
Layout
The PIP offers three choices of how it is displayed on screen,
these are:
•Child.
•Split.
• Wide.
Child
Selecting this option produces a picture within the main screen.
Both the size and position of the inset can be adjusted and the
aspect ratio of both images is maintained.
Split
Selecting this option splits the main screen in two sections verti-
cally. The PIP enlarges to occupy half of the screen width,
squashing the main screen into the other half. This option does
not maintain aspect ratios and therefore results in both images
looking ‘squashed’.
81277_1.book Page 22 Thursday, August 17, 2006 1:51 PM