Filter
Top Products
15
Engine/Cylinder Head, Valves 944
REMOVING AND INSTALLING CAMSHAFTS
AND CYLINDER HEAD
Removing:
1.
Align lifting-platform pads beneath
jacking points and raise car.
2. Place protective covers on
fenders.
3. Disconnect ground lead from
battery
4. Disconnect breather hose for
toothed-belt cover from rear of
lower section of air filter. Detach
entire filter assembly and remove.
5.
Remove air-flow sensor and
disconnect support (M 8 bolt)
from intake manifold.
6.
Remove throttle-valve actuating
able complete with reversing
roller and holder. Remove oil
dipstick. Slacken hose clamps at
intake manifold, brake booster
and breather hose and remove.
7.
Remove cover of fuel-distribution
pipe. Slacken hose clamp for fuel
return line and disconnect hose.
Disconnect fuel feed while
countering.
15 - 106 Removing and Installing
Camshafts and Cylinder Head
Printed in Germany