Filter
Top Products
10
Engine/Crankcase 944
12. Remove engine underguard.
13.
Open coolant drain plug and
catch coolant in a suitable
container. Disconnect alternator
breather hose.
14.
Disconnect coolant hose at
bottom right of radiator from
engine and remove. Catch any
coolant which may be left.
15.
Disconnect electric leads from
fan motors, detach fan-motor
bracket from radiator and remove
by lowering from car.
16.
Slacken coolant hose and
breather hose from top left of
radiator and remove. Disconnect
electrical connection from
temperature switch to radiator.
Disconnect coolant hose from
expansion tank and remove.
17.
Disconnect radiator at brackets
and remove radiator by lowering
from car.
18.
Attach support beam 10-222 A to
front transport bracket of
engine and hold engine in
installation position. Check
that beam is correctly attached.
10 - 104 Removing and Installing Engine Printed in Germany