Filter
Top Products
79
MAINTENANCE AND LUBRICATION
Filter Systems (RANGER TM)
Air Filter
Always check and c hange the air
filter at the intervals outlined in the
Periodic Maintenance Chart
beginning on page 54.
1. Remove the s eat to access the air
cleaner.
2. Remove the breather hose (1) from
the cylinder.
3. Remove the wing nut (2) and remove
the air cleaner cover (3).
4. Remove the primary filter (4) and the
secondary filter (5).
NOTE: Do not attempt to clean the
primary filter. Install new.
5. Wash the secondary (foam) filter with
hot soapy w ater. Rinse and dry
thoroughly.
6. Inspect the filter for tears or damage.
Replace with a new filter if needed.
7. Apply foam filter oil or clean engine oil
and squeeze the filter until excess oil is
removed.
8. Reassemble all components.
Fuel Filter
Your Polaris vehicle is equipped with an in-line fuel filter. Have your
dealer replace it after every 100 hours of operation. Do not attempt to
clean the fuel filter.
1
2
3
5
4