Filter
Top Products
1
2
3
32
FEATURES AND CONTROLS
Switches
Ignition Switch (1)
The ignition switch is a three-position, key-operated switch. The key
can be removed from the switch when it is in the OFF position.
OFF Engine off. All electrical c ircuits
are off except Acc. 12V.
ON Electrical c ircuits ar e on.
Electrical equipm ent can be used.
START Electric s tarter i s engaged by
holding ignition switch key in this
position. Upon release, the key
will return t o the ON position.
WARNING
Leaving the keys in the ignition can lead t o unauthorized us e of
the v ehicle resulting in serious injury or death. Always remove
the ignition key when the vehicle is not in use.
Light Switch (2)
The ignition switch key must be in the ON position to
operate the headlights. The switch has three positions:
A: High Beam
B: Low Beam
C: Off
AWD/Differential Lock Switch (3)
The AWD/Differential Switch has three positions:
D: AWD
E: Differential Lock
F: Off
See page 33 for differential switch operating
instructions.
Vehicles equipped with AWD can be operated in
either 2WD or AWD. Press the AWD switch to engage the
AWD. Press the bottom of the rocker switch to return to 2WD.
NOTE: Under some conditions, it’s possible for the AWD to remain
engaged. See page 51 for manual dis engagement
instructions.
A
B
C
AWD
D
E
F